Tycon Systems TPDIN-MONITOR-WEB2 PowerSens Web Remote Monitor& Cont

Tycon Systems TPDIN-MONITOR-WEB2 PowerSens Web Remote Monitor& Cont
Tycon Systems TPDIN-MONITOR-WEB2 PowerSens Web Remote Monitor& Cont
Currently Out of Stock
The PowerSens™ Web Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays. The system has built-in surge protection to prevent damage from electrical surges.

On board data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access.

The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a PoE Switch by power cycling it, thereby rebooting all devices attached to the switch. Relay CH1 and CH2 are Normally Closed type, Relay CH3 and CH4 are Normally Open type. Relays don’t use any power when they are in their default position. CH4 has additional functionality built into the user interface to allow for starting a generator.

Two of the current ports provide bi-directional current (+/-), showing direction of current flow. This is useful for monitoring batteries so you can see when the battery is charging and when it is discharging. One of these current ports supports external current shunts so very large currents can be monitored. The User Interface provides for quick calibration of external shunts by entering the shunt resistance.

Connections are via removable wire terminal connectors. This allows for easy troubleshooting and maintenance because the unit can be removed from the system without disturbing the system wiring.
Price: $149.95
Product Details

Specifications TPDIN-Monitor-WEB2

Voltage Measurement (DC) V1, V2, V3, V4 = 1-80VDC
Voltage Measurement Accuracy +/- 0.1V
Current Measurement (DC) I1, I2 = 0.1A to 20A, I3 = +/-10A I4 Supports External Current Shunts – Input Range +/-25mV
Current Measurement Accuracy +/- 0.1A
Common Mode Voltage Range -20V to +80V
Temperature Measurement T1,T2 = -40C to 125C
Temperature Measurement Type T2 = Embedded, T1 = External Sensor (included)
Temperature Measurement Accuracy +/- 1 degC
Relays CH1, CH2 (NC); CH3, CH4 (NO) = 10A 30VDC, 125-250VAC
Relay Control CH1, CH2, CH3, CH4 = Manual or Automatic based on Volts, Amps, Temperature, Ping or Time
Power Requirements 10-57VDC Wire Terminal or 802.3af/at Class 0 PoE or 24V Passive PoE 1.5W All Relays Off, 3.5W All Relays On
Accessibility Via Web Browser and SNMP
Data-Logger FIFO, Max 4048 data sets, Programmable log interval
Connections Removable Wire Terminal
Wire Size 12AWG Max
Mounting DIN Rail
Operating Temperature -40C to +75C (-40F to 167F)
Humidity (RH) 0% - 90%
Dimensions (LxWxH) 125 x 102 x 46mm (4.9” x 4” x 1.8”)
Weight 410g (14.5 oz)
Product Reviews
Rate this product:  1   2   3   4   5 

May we also suggest the following that are compatible with the above product...
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.