The cart is empty. {{shoppingcart.totalQuantityDisplay}} {{shoppingcart.subtotal}} {{shoppingcart.total}}
Show product details for {{shoppingcartitem.description}}
Show product details for {{shoppingcartitem.description}}
{{shoppingcartitem.description}}
Qty. {{shoppingcartitem.quantity}}
{{productoption.name}}
View Cart View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)
(314)735-0270

New Arrivals


Specify a quantity for any of the products listed on this page, then click 'Add to Cart' to add them to your shopping cart. If the quantity field is not visible for a product, you must click on the 'More Details' button and select the options or fill out the fields that require your input.

Qty
 
Description
Price

100 Pack. Use with All Shireen's Cat5 Indoor/Outdoor Ethernet Cable Dual Grounding - Internal Metal and External Drain Wire Tab
Price:
$59.00
QoH:0


COMING SOON!!!! PRE ORDER YOURS TODAY!!

R11eL-EC200A-EU An extra cost-effective upgrade of our previous R11 LTE4 modem. It offers the same speed (up to 150 Mbps) and features as the earlier version, but the price is even lower now!

This mini-PCIe modem is designed for the EMEA/APAC/Australia regions, and the supported frequencies include the popular B28 band
Price:
$65.00
QoH:0


COMING SOON! PRE-ORDER YOURS TODAY!!


This mini-PCIe modem is designed for the EMEA/APAC/Australia regions, and the supported frequencies include the popular B28 band.

An extra cost-effective upgrade of our previous R11 LTE6 modem. It offers the same speed (up to 300 Mbps) and features as the earlier version, but the price is even lower!

Carrier aggregation allows the R11 to use multiple bands simultaneously. That is a huge advantage in areas with many LTE users. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation!

Price:
$85.00
QoH:98


COMING SOON!!!! PRE-ORDER NOW!

**INTERNATIONAL ONLY**


A compact heavy-duty LTE access point with a built-in GPS. Add extensive networking and tracking options to your vehicle without breaking the bank! 3 MiniSIM slots, multiple powering options, extra miniPCI-e slot, console port.

Price:
$199.00
QoH:0


It has two Ethernet ports, an on-board CPU, some RAM, and the crown jewel: a powerful built-in CAT-M narrow-band LTE modem. For extremely efficient, low-cost, low-bandwidth mobile internet connectivity. Sure, the narrowband won’t be able to stream YouTube videos, but it serves a different purpose: it offers better network coverage and transmits data via the most affordable data plans in the world. With the IP65 water resistance rating, the sturdy unit can survive a variety of harsh environments and setups: damp attics, rainy forests, farming equipment and so on. It has PoE-in, PoE-out, and a 2-pin DC terminal for handy powering. And to make management even easier - we’ve added a simple single-chain 2.4 GHz wireless - so you can use the MikroTik smartphone app to configure everything.


Also, a fun bonus: the board supports GPS, so if you know your way around RouterOS scripting, you can try collecting weekly, daily or even hourly location data as well!

Price:
$89.00
QoH:0


Ncore Lite Panel Kit logo


A new, customized bundle for the growing solar market: NCore Lite + ACDC + DCDC The kit has been specifically developed to be used in renewable energy projects in the telecommunications Industry, through customization of Hardware and Firmware of NCORE-LITE.

The bundle also comprises a new hardware release of DCDC module and the standard ACDC input module, for battery charge. Solar Panels are not included.
Price:
$5,831.00
QoH:0


GigaKey hardware configuration Key for GS-G-POE/GS-G-POE-CS/8INJ. Mode A Reverse suitable for Intracom WiBAS G5-Connect+

Price:
$7.00
QoH:0


The Gigasync Base Unit can host up to 3 cartridges. Each cartridge has 4 ports that can be PoE injectors or Power Terminals. The Cartridges can be chosen based on the setup requirements and are hot-swappable.

Price:
$668.00
QoH:3

GigaKey hardware configuration Key for GS-G-POE/GS-G-POE-CS/GS-LT/8INJ.

Mode A Reverse+B suitable for Ceragon IP-20C/IP-50C, Cambium PTP 670, PTP 820C/E/S, PTP 850C/E, cnWave V5000

GigaKey is the generic name that identifies the selection keys of the output pinout of each PoE port.
The GigaKey has been designed to avoid handling the microswitches or jumpers that normally perform this function, but are subject to errors. This simplifies selection, and executable simply by inserting the chosen key into the slot corresponding to the PoE port.
If desired, you can select a different GigaKey for each PoE port on the same cartridge.
At the moment, 4 different GigaKey have been developed that allow a wide range of compatibility between devices on the market. They are easy to identify by their code and different colors.

Price:
$7.00
QoH:0


C-TER is designed to supply power to devices directly on terminals.

It consists of a single rack unit that encloses the main control and interface system and output ports.

Price:
$1,426.00
QoH:0

Surge Protector Injector is a Power over Ethernet injector with integrated surge protection device which belong to the Smart Power Module System Family: a modular system designed to supply Power over Ethernet devices. Each module works independently and ensure the highest level of reliability and security.

Through the side selectors you can set the PoE Mode and polarity.
C-TER is designed to supply power to devices directly on terminals.

It consists of a single rack unit that encloses the main control and interface system and output ports.

Price:
$117.00
QoH:0

Gigabit High Power Surge Protection

Surge Protector Passthrough is a lead-through surge arrester that can be inserted into a Power over Ethernet line in order to prevent any damage caused by overvoltage.

It simply connects the two ports without making any changes to what is applied, simply adding the protection of the arresters to the line.

Price:
$43.00
QoH:0


****DISCONTINUED!! GET IT NOW WHILE STOCK IS AVAILABLE****


The SXT LTE kit (product code RBSXTR&R11e-LTE-US) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. The unit includes a 24 V power supply, but can support full range of 12-57 V and 18-57 V with PoE-Out and is 802.3af/at compliant.

The device has a built in high quality 3G/4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link.

RBSXTR&R11e-LTE-US includes LTE modem that supports LTE bands 2, 4, 5 and 12, mostly used by mobile operators in United States, Canada and Latin America.

Price:
$149.00
QoH:3


LAIRD PIGTAIL MMCX TO N-FEMALE BULKHEAD 16 INCH CABLE(NEW)


700MHz to 5.825GHz RF Cable Assemblies

The cable assemblies offered by Pacific Wireless are engineered for peak performance up to 6GHz. They are tested 100% and certified to meet performance specifications. Equipment manufacturers require certified cable assemblies to minimize system losses to within known parameters and these cable assemblies meet those requirements. The manufacturing processes and raw materials are well controlled in order to provide very consistent performance from lot to lot.
Price:
$9.95
QoH:35


C-PoE is designed to supply power to devices on Power over Ethernet (PoE) standards. It consists of a single rack unit that encloses the main control and interface system and output ports.
Price:
$1,188.00
QoH:0


The SFP-S20-T is a high performance and cost-effective module for serial optical data communication applications specified for single mode of 1.25 Gb/s. It operates on +3.3V power. The module is intended for single mode fiber, operates at a nominal wavelength of 1310nm, and complies with the Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All are housed in a metal package and the combination produces a reliable component.

Extended Operating Temperature 1310nm FP LD Data Rate: 155Mbps, NRZ Single +3.3V Power Supply RoHS Compliant and Lead-free AC/AC Differential Electrical Interface Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP) Duplex LC Connector Compliance with 100Base-FX of IEEE802.3u Standard Compliance with FDDI PMD Standard Compliance with ATM Standard
Price:
$24.00
QoH:4


The TP-POE Power over Ethernet Power Sources offered by Tycon Power are quality midspan power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the “R” model the voltage is reversed. 4,5(V-) and 7,8(V+). The Ethernet spec supports distances up to 100m (328 feet).

There are models available that support 802.3af and 802.3at as well as models that support Gigabit Ethernet. The units are auto ranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and overvoltage. The medium power models (TP-POE) have power output up to 24W and the high power models (TP-POE-HP) up to 50W. They are available in 18V, 24V and 48-56V DC Output with load regulation within 5%. The CI model has a special current sense LED which changes color when a PoE device is plugged onto the CAT5 cable.

If the remote device does not support power over Ethernet, splitters (POE-SPLT-S) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.

Price:
$28.20
QoH:4


This ProLine Sector Antenna is engineered to deliver high, stable gain over wide bandwidths and suppress side-lobes and back-lobes for mitigating inter-sector interference.

The KPP-3DP65S-45 is a 65 Degree, 18.1 dBi sector antenna operating from 3.4 GHz to 4.2 GHz. This antenna features 2 ports and ±45° slant polarization with excellent front-to-back of 35 dB.


Features

Stable performance over wide bandwidths with flat gain

Superior port isolation, cross polarization discrimination, gain, VSWR, and front-to-back

Ultra-wide bandwidths for world-wide markets

Upper side lobe suppression reduces inter-cell interference

Null fill improves coverage near the tower

Side-lobe mitigation and improved front-to-back performance help reject interference

Integrated hoisting hook for added safety and convenient installation

Heavy-duty aluminum brackets with powder coated steel hardware

Universal radio bracket with quick-release slot/clip design is compatible with many AP radios

Mounts to any size mast from 0.75" to 4.5"

Price:
$349.99
QoH:2



***DISCONTINUED PRODUCT***


The RB411AH is designed with size and cost in mind. This small device will fit perfectly into small AP, CPE devices or run your wireless backup link. The powerful 680MHz Atheros CPU gives it the ability to do all of this and more.

The RB411AH includes RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager.

Price:
$99.00
QoH:1


Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports.

Fits RB433 series products and RBM33G
Price:
$20.00
QoH:31


SFP+ CWDM module 10G SM 10km 1470nm Dual LC-connector DDM

Price:
$129.00
QoH:20


SFP+ CWDM module 10G SM 10km 1510nm Dual LC-connector DDM

Price:
$129.00
QoH:20


SFP+ CWDM module 10G 10km 1490nm

Price:
$129.00
QoH:20


SFP+ CWDM module 10G 10km 1530nm
Price:
$129.00
QoH:20


SFP+ CWDM module 10G SM 10km 1550nm Dual LC-connector DDM
Price:
$129.00
QoH:20


SFP+ CWDM module 10G SM 10km 1570nm Dual LC-connector DDM
Price:
$129.00
QoH:20


SFP+ CWDM module 10G SM 10km 1590nm Dual LC-connector DDM
Price:
$129.00
QoH:20


SFP+ CWDM module 10G SM 10km 1610nm Dual LC-connector DDM
Price:
$129.00
QoH:0


Baicells Simcard, Single

Price:
$5.99
QoH:16
Price:
$199.00
QoH:8


BTU Research BTU-POI-UPS-1100


Battery Backed PoE Injector Brownout Buddy 30 Watt 1100mAH (BTU-POI-UPS-1100)

The BTU-POI-UPS-1100 is used primarily maintain 18V only outdoor access points, repeaters, and in some cases customer CPEs where space is an unit is powered by an on board AC/DC power supply wall wart under normal utility power conditions and converts to battery backup in the event of a power disruption.A 1.1A load will operate for approximately 2 hours on battery back- device comes complete with up to 18V tap off with a phoenix connector, to allow for a multi-device setup router/modem/access point.(MAX load current 1.1 Amps, combined).

Price:
$145.00
QoH:56


BTU Research BTU-POI-UPS-600


Battery Backed PoE Injector Brownout Buddy 30 Watt

The BTU-POI-UPS-600 is used primarily maintain 18V only outdoor access points, repeaters, and in some cases customer CPEs where space is an unit is powered by an on board AC/DC power supply wall wart under normal utility power conditions and converts to battery backup in the event of a power disruption.A 1.1A load will operate for approximately 2 hours on battery back- device comes complete with up to 18V tap off with a phoenix connector, to allow for a multi-device setup router/modem/access point.(MAX load current 1.1 Amps, combined).

Price:
$95.70
QoH:9


Baicells Atom R9 Indoor 3.5GHz 5dBi

The Baicells Atom R9 CPEs are the most simple and efficient means to connect subscribers in virtually all situations. Our indoor and outdoor Atom models provide robust throughput to meet increasing demands in the current streaming market while providing a variety of models to support even your most creative applications. Designed for growth and expansion, the Atom will continue to support your network as future versions of LTE technology becomes available.

Whether high-density MDUs, campuses, stadiums, kiosk applications or other events this CPE will bring LTE connectivity while minimizing truck rolls. Equipped with a built-in WiFi router, SIP client, and 4 Ethernet ports, it’s an all-in-one CPE that is able to replace multiple network components.



Price:
$174.99
QoH:7


The Baicells 11 dBi model atom CPE is the choice for short range non line of sight LTE CPE connectivity. With a wider beam, it maximizes collection of nearby reflection to optimize link quality. It’s also our lowest priced outdoor CPE. The 11dBi atom is constructed in a form factor that allows for seamless insertion into existing reflectors.
Price:
$224.00
QoH:5
The LHG LTE kit is a device for remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can't. Due to it's large sized high gain antenna, the device is capable to connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available.

The unit is equipped with one Ethernet port, has a built in high quality Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink.

RBLHGR&R11e-LTE includes LTE modem that supports International LTE bands 1, 2, 3, 7, 8, 20, 38 and 40.
Price:
$159.00
QoH:2


The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply.**CASE IS 10 UNITS**
Price:
$119.00
QoH:10


Antenna Dual-Band Omnidirectional



Suitable for 802.11abgn and 802.11ac with RP-SMA (male) connector.



Compatible with Wireless Access Points & cards that have RP-SMA antenna jacks.

Omni dipole antenna: Radiates signal with a beam of 360 degrees; also receives signal from 360 degrees around it

As client antenna: Connect to access points in any direction.

As access point antenna: Provides signal to clients in all directions (360-degree horizontal beamwidth).

Compliant with 802.11ac, 802.11n & 802.11g

Mounts directly onto RP-SMA (female) connector of access point, bridge, client, or booster

Portable size: Easily fits in laptop case.


We have two versions of this antenna:


Articulating Right Angle: Bottom section of antenna has hinged joint that bends up to 90-degrees. Can be used either straight or with joint-bend. Part# is ADD7ext Fixed Right Angle: Bottom section of antenna has a fixed right-angle joint at 90-degrees. The fixed right angle provides weather-resistance / waterproofing. Part# is ADD7extFRA.

Compatibility with wireless standards & applications: This omni directional dual band antenna's range of frequency band compatibility in the 2.4GHz and the 5.8GHz frequencies, its excellent low broadband VSWR at < 1.7, and impedance matching to 50 Ohm gear, makes it suitable and compliant for all the following applications:

IoT wireless & M2M: 802.11AC, 802.11N, 802.11G, 802.11B, 802.11A

As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth). As client antenna: Connect to an access point in any direction.

Designed for wireless 802.11ac and other Dual Band 2.4GHz / 5.8 GHz applications.


RP-SMA = Reverse Polarity SMA . Also known as SMA-RP, SMA-R, SMA RP, SMA R.

RP-SMA gender is counter-intuitive: The gender is referring to the pins inside-not the threads. RP-SMA male have threads on the inside. More details regarding RP-SMA gender determination.

RP-SMA-male is also called "plug" and the respective female connectors are also called a " jack ."

RP-SMA are round screw-type connectors, with medium-sized, threaded coupling connectors that are rated for frequencies from the lowest (DC) up to 18GHz.

RP-SMA male connector fits items that have an RP-SMA (female) jack/connector.

We offer an SMA wrench to assist in installing antennas, cables and adapters with SMA or RP-SMA connector (s).

Composition of RP-SMA male connectors:

96% brass-copper alloy

Less than 4% lead content (ROHS Compliant) 0.1% Chromium VI compound 0.01% (by weight) Cadmium / cadmium compounds 0.1% Mercury 0.1% PBBs 0.1% PBDE Mounts directly onto RP-SMA(female) connector of access point, bridge , USB WiFi adapter, or booster. See other magnetic bases that fit this antenna and have antenna cables with other types of connectors . Articulating (Bendable) Right Angle: This antenna can be angled up to 90 degrees (articulating right angle) or positioned straight. The articulating (bendable) right-angle isn’t weatherproof: Water can seep into the angled part of the antenna. Articulating right-angle antennas are therefore recommendable for indoor use or protected outdoors, i.e. under an eave. If you need a weatherproof dipole antenna, you should choose either a straight dipole or one with a fixed right angle. See our weatherproof antennas.

COMPATIBLE MOUNTS & TECH SUPPORT PAGES Magnetic bases that fit this antenna and have antenna cables with various connector-types Antenna Mounts & Brackets Antennas:

How to choose Directional Antennas Omni-Directional Antennas Wireless Frequencies: 2.4GHz, 5GHz, 900MHz, WiMAX All of our antennas pass QC test before we ship them.

Price:
$5.99
QoH:4
 
ODRMTE 48V DC Fan - MEC0384V2-0000-A99, Axial Fan, MAGLevrMotor, Medium Speed, Vapo, MagLev Series, 48 VDC, 120 mm, 38 mm, 116 cu.ft/min

QoH:10


THIS ITEM IS BEING DISCONTINUED. THE SUGGESTED REPLACEMENT IS THE RBwAPG-5HacD2HnD (wAP ac) or RBcAP2nd (cAP).

The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards.

The wAP is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it's mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.
Price:
$45.00
QoH:0


MIKROTIK- Power Supply Straight Plug

24v 1.2A power supply with straight plug. Available with either US (type A or EU (Ttpe C) power plugs

Price:
$12.00
QoH:20


This is a 6.5 dBi omni antenna kit for LoRa® within the 900-928 MHz frequency range. It has a strong 1m long SMA cable, and a mechanical holder for quick and easy mast attachment.

The improved cable durability and the IP66 water resistance rating (protection against powerful jets) make this kit an excellent choice for all kinds of marine and coastal projects.

You can use it with the KNOT LR9 kit, wAP KR9, or other LoRa devices with the appropriate frequency support.

Price:
$49.00
QoH:0