PTP 650- Connectorized with AC Power Supply (Standard 125Mbps- License Upgrade Options Available)- Complete Link

FLEXIBLE, SPECTRALLY-EFFICIENT, SELF-OPTIMIZING SUB-6GHz Solution

Based on our widely, deployed, field-proven non-line-of-sight (NLOS) technology, PTP 650 wireless Ethernet bridges offer an ideal array of features that give you more capacity, greater operational flexibility, and the highest spectral efficiency in the industry. PTP 650 systems provide 4.9 to 6.05 GHz, multi-band flexibility in a single radio and operate in channel sizes from 5 to 45 MHz.

With Dynamic Spectrum Optimization (DSO), PTP 650 Systems are constantly optimizing the channel of operation to maximize link reliability and performance. The systems can provide up to 99.999% availability in virtually any environment, including non-line-of-sight, long distance line-of-sight, high interference, over water and desert, and through extreme weather conditions. As a result, you can deliver more throughput with less spectrum and less investment in even the most challenging environments.

DESIGNED WITH YOU IN MIND

Whether your organization is an enterprise, government agency, or service provider, PTP 650 Systems are ideal solutions for a wide array of applications such as T1/E1 and fibert replacements or extensions; video surveillance backhaul; LTE, macro-cell, and small-cell backhaul, last-mile access; disaster recovery; network redundancy; and building-to-building campus connectivity.

Field Tested and Industry Certified

• FIPS 197 128/256- bits AES encryption
• IEEE1588v2 and Synchronous Ethernet (SyncE)
• IPv6/IPv4 dual-stack management support
• Ingress Protection rated (IP66/67) protective aluminum radio enclosures
• MEF9 certification

Radio Technology

• RF Bands*: Wide-band operation 4.9-6.05 MHz (Allowable frequencies and bands are dictated by individual country regulations. The most common bands are listed here.)
  • 4.940 - 4.990 GHz (Public Safety)
  • 5.15 - 5.25 GHz
  • 5.25 - 5.35 GHz
  • 5.470 - 5.725 GHz*
  • 5.725 - 5.850 GHz
  • 5.825 - 6.050 GHz
• Channel Sizes*: 5, 10, 15, 20, 30, 40, and 45 MHz channels (channel sizes depend on individual country regulations)
• Spectral Efficiency: 10 bps/Hz maximum
• Channel Selection: By Dynamics Spectrum Optimization or manual intervention; automatic selection on start-up and continual self-optimization to avoid interference
• Maximum Transmit Power*: Up to 27 dBm at BPSK; up to 23 dBm at 256 QAM
• System Gain: Integrated: Up to 164 dB with 20 MHz channel and integrated 23 dBi antenna; varies with modulation mode, channel size and spectrum; Connectorized: Varies with modulation mode and antenna type
• Receiver Sensitivity: -98 dBm with 5 MHz channel
• Modulation / Error Correction: Fast Preemptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual payload MIMO
• Duplex Scheme: Synchronized Time Division Duplex (TDD) and Half Duplex Frequency Division Duplex (HD-FDD); dynamic or fixed transmit/receive ratio; each TDD-synchronized link requires a Cambium TDD-SYNC synchronization unit* to provide an accruate timing reference signal
• Antenna: Integrated: Flat panel- 23 dBi; Connectorized: Can operate with a selection of separately-purchased single- and dual-polarity antennas through 2 x N-type female connectors (local regulations should be checked prior to purchase)
• Range: Up to 124 miles (200 km)
• Security: FIPS- 197 compliant 128/256 bit AES Encryption (optional)
  • HTTPS and SNMPv3
  • Identity-based user accounts
  • Configurable password rules
  • User authentication and RADIUS support
  • Event logging and management; optional logging via syslog
  • Disaster recovery and vulnerability management

Ethernet Bridging

• Protocol: IEEE 802.3
• User Data Throughput:
  • Dynamically variable up to 450Mbps
  • Maximum conditions- 2x2, 45 MHz channel*, 256 QAM
  • Flexible capacity licensing model:
    • Lite Capacity: Up to 125Mbps
    • Mid Capacity: Up to 250Mbps
    • Full Capacity: Up to 450Mbps
• Latency: 1 - 3 ms one-direction latency
• QoS: 8 Queues
• Packet Classification: Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
• Packet Performance: Line Rate (>850K packets per second)
• Timing Transport: Synchronous Ethernet; IEEE 1588v2*
• Frame Support: Jumbo frame up to 9600 bytes
• Flexible I/0: 2 x Gigabit Ethernet copper ports; Gigabit Port 1: Data + PoE power input; Gigabit Port 2: 802.3at PoE output port; SFP port (single-mode fiber, multi-mode fiber, and copper Gigabit Ethernet options available)
• T1/E1 TDM Support: 8 x T1/E1 TDM module (optional indoor unit)*; G.823-compliant timing; DC power input (compatible with AC+DC Power Injector output)
• T1/E1 Latency (one way): 1 to 3 ms typical depending on range, bandwidth, modulation mode and number of T1/E1 ports; accurate T1/E1 latency figures can be determined for any given configuration using the Cambium PTP LINKPlanner

*1 Regulatory conditions for RF bands should be confirmed prior to system purchase. All bands use the same hardware. Individual bands and channel widths are available pending local regulatory approvals and region code licenses.
*2 Pending FCC authorization in North America.
*3 5, 15, and 30 MHz channel widths will be available in a future release.
*4 Gain, maximum transmit power and effective radiated power may vary based on regulatory domain and region code license.
*5 Available in a future release.
*6 Web access via HTTPS/TLS is available on AES-enabled radios.

Management & Installation

• LED indicators: Power status, Ethernet link status, and activity on Extended Range PoE supply
• Network Management: In-band and out-of-band management (00BM)*
• System Management:
  • IPv6/IPv4 dual-stack management support
  • Web access via browser using HTTP or HTTPS/TLS*
  • SNMP v1, v2c, and v3, MIB-II and proprietary PTP MIB
  • Cambium Wireless Manager, WM 4.0/SP4 or higher
  • Online spectrum analyzer (no impact on payload traffic or network operation)
• Installation: Built-in audio and graphical assistance for link optimization
• Connection: Distance between outdoor unit and primary network connection: up to 330 feet (100 meters) using Power-over-Gigabit Ethernet, longer distances up to 984 feet (300 meters) can be achieved using fiber interface

Physical

• Dimensions: Integrated Outdoor Unit (ODU); Width 371mm (14.6"), Height 371mm(14.6"), Depth 81mm(3.2"); Connectorized ODU: Width 204mm (8.0"), Height 318mm(12.5"), Depth 90mm (3.5")
• Weight: Integrated ODU: 4.1kg (8.95lbs) including bracket; Connectorized ODU: 3.1kg (6.8lbs) including bracket
• Operating Temperature: -40° to +14° F (-40 to +60° C), including solar radiation
• Dust/Water Intrusion Protection: IP66 and IP67
• Wind Speed Survival: 200 mph (322 kph)
• Power Supply: Two options
  • AC Power injector: 32° to 104°F (0° to + 40°C); 35 W; 90-240 VAC, 50/60 Hz
  • Dimensions: Width 5.2" (132mm), Height 1.4" (36mm), Depth 2" (51mm)
  • AC + DC Power injector: -40° to 140° F (-40° to +60° C); 70 W; 90-240 VAC, 50/60 Hz
  • Dimensions: Width 9.75” (250 mm), Height 1.5” (40 mm), Depth 3” (80 mm)
• Power Consumption: 30 W maximum (up to 70 W with 802.3at device on auxiliary port)

Environmental & Regulatory

• Protection and Safety: UL60950-1; IEC60950-1; EN60950-1; CSA-C22.2 No. 60950-1; CB approval for Global
• Radio:
  • 4.9 GHz: FCC Part 90Y, RSS-111
  • 5.x GHz: FCC Part 15, sub-parts 15C and 15E; RSS 210 Issue 8; EN 302 502; EN 301 893 Eire ComReg 02/71R1, UK Approval to IR2007
• EMC: Europe – EN 301 489-1 and -4