1101-959- ALPU-PTP-M OD GbE/PoE metal encl

Our Products: Tower Enclosures > Outdoor Enclosures

SKU: 1101-959

The Transtector ALPU-PTP-M is ideal for protecting high speed 10/1000BT communications networks. The protection circuits utilize silicon avalanche diode technology. The protection circuit board is housed in an aluminum enclosure. The enclosure is an outdoor qualified NEMA 3R type with versatile mounting flanges. The ALPU-PTP-M features Rj45 protection circuits for gigabit Ethernet data (pins 1, 2 & 3, 6 & 4, 5 & 7, 8). The unit is intended to be wall mounted with an optional bracket available to allow a wide range of pole mount configurations. A dedicated ground point on the housing must be bonded to the nearest grounding system (or Master Ground bar) for proper surge protection functionality. The system wiring is installed with RJ-45 type connectors that can be install directly in the chassis without having to cut or splice or route through awkward strain relief holes.

The enclosure includes a built in cable retention feature for improved cable management using screw down clamps. In the unlikely event of surge protection self sacrifice, the protection elements will fail short to disrupt communication.

Price: $199.00

Add to Wishlist

Product Details

Electrical 1000Base-T Gigabit Ethernet Protector:

Connector Style	RJ45 Cat5 shielded 100 ohm
Data Rate	1000 Mb/s
Maximum Continuous Operating Voltage	92 Vpeak
Protected Pins	(1, 2)(3, 6)(4, 5) & (7,8) pass through
Impedance	85 to 115 ohms
Surge Suppression	134 Vpeak @ 100 A, 10/1000
Suppression Response Time	< 5 ns

Environmental:

Operating/Storage Temperature	-40C to 75C
Relative Humidity	95% (non-condensing)

Mechanical:

Weight	0.8 lbs (0.36 kg)
Product Material	Die-Cast Aluminum

Applicable Industry Standards:

Bonding and Grounding	NEC 800.100 and 830.100
Surge Suppression	GR-1089-2006
10/100BT (Ethernet), 1000BT (Gigabit Ethernet) Communication Protocol	IEEE 802.3
POE Protocol	IEEE 802.3af